Reasons to clean your burnt Iron :
A burnt iron not only can reduce the efficiency of your iron, but it can also cause snagged clothing, unpleasant odors, uneven steam production, and burn marks that will stain fabrics. And if these aren’t enough, residue-covered irons can cause fire. So, to avoid this unnecessary situation, lets discover 10 amazing hacks to clean your burnt iron.
Best 9 tips to clean burnt Iron:
1. Use toothpaste
Wonder how to clean iron with toothpaste? Rub a little amount of regular white toothpaste onto the burnt areas of iron soleplate using a paper towel or cotton bud and only cover the problematic areas. Clean the plate using damp microfiber cloth.
Avoid panicking if toothpaste accidentally enters the steam vents. If happens, fill the water tank and set the iron upright on an old towel, turn on the steam, and let it sit on the ironing board for a minute. hold the steam button down for a few seconds and clean. Repeat until you get free-flowing steam.
2. Clean with vinegar and baking soda
You probably already have baking soda and white vinegar in your home. which together produce an efficient cleaning solution. Making a paste out of equal parts vinegar and baking soda, massage the soleplate using a clean microfiber cloth dipped in the mixture.and your iron is ready to use.
3.Use only baking soda
Everything from stoves to dishwashers can be cleaned with baking soda, which is a miracle cleaner. Additionally, it cleans your iron. use two tablespoons of baking soda and one tablespoon of water to make a stain-removing paste. Rub it gently on the iron plate, taking care to avoid getting baking soda in the steam holes. The next iron-cleaning advice I have is to be careful to clean the steam holes if you do manage to get paste in them.
6. magic eraser to create magic
Even if your iron has stubborn stains, a magic eraser can do wonders for it. Once the magic eraser is wet, wipe the sponge with a cold iron to remove any stains. Wet the sponge again as necessary.this hack especially works on hard water stains.
7.Remove Melted Plastic using Ice Cubes and a Knife
You’ll have a little mess to clean up if your iron gets any touch with plastic, but it’s not too difficult. Unplug your iron and let it cool as soon as it makes contact with plastic. To solidify the plastic rapidly, drop the iron plate onto some ice cubes in a metal basin or pan (you can skip this step if the plastic has already solidified on a cool iron). After removing the plastic with a plastic knife, spray some vinegar on the surface or use a moist cloth to clean it. Before using the iron again, make sure all plastic is removed.
8. Clean with dryer sheets
set your iron at the lowest setting and start rubbing dryer sheets over the soleplate. When a dryer sheet becomes too hot, throw it away and grab another one until the iron is spotless and shiny again.
9. Rub with paracetamol:
Paracetamol (e.g., acetaminophen, Tylenol) unexpectedly is one of the best tricks for cleaning an iron. Set the iron to the highest temperature. When the plate is hot, apply it straight to the burned area. The pill will break down, transform into a gel and remove the burned area. The soleplate should be cleaned with a wet cloth or paper towel. Repeat as necessary to get all of the stains.
Photo by cottonbro studio: https://www.pexels.com