Although a jetted tub adds luxury to any bathroom, it can soon become a nightmare if not cleaned on a regular basis. As water that is not moving becomes trapped in the pipes, jetted tubs can accumulate germs, mildew, and other debris over time. Deep cleaning every corner of a jetted tub may seem impossible, but it is possible. Your jetted tub may be brought back to its former elegance with a few ordinary home materials and you’ll soon be taking relaxing baths again.
How Often Should a Jetted Tub Be Cleaned?
The frequency of use determines how frequently you should clean your jetted tub. It should be rinsed every two weeks and given a deep clean once a month if you are using it multiple times a week. To avoid collection and the development of mold, it is necessary to clean the dirt, oil, skin, and germs that gather on the tub’s sides and in the jets.
Supplies Required
Before you begin, make sure you have these supplies on hand:
- A microfiber cloth
- Water
- Distilled white vinegar
- diluted dishwashing liquid
- baking soda
- toothbrush
Step 1: Flush the Tub
You need to start by flushing the tub before you do any scrubbing. Fill the tub with cold water at least 2 inches above the jets. For at least ten minutes, run jets without soap or additional ingredients. Shut off the jets and remove the water.
Step 2: Add Hot Water to the Tub
You should soak the tub in hot water and distilled white vinegar after flushing it. The acidity helps clean without causing harm to the parts. A few inches above the jets, add hot water to the tub. Add 2 tablespoons to 1/4 cup or more, depending on the size of the tub of mild dish soap. After the detergent has dissolved, stir in two glasses of pure white vinegar. After 15 minutes of jet operation, close the valves. Empty the bathtub.
Step 3: Clean the Tub
To remove any remaining stains, scrub the tub with a homemade baking soda paste once it has drained. Combine baking soda, water, and a small amount of dish soap in a basin to form a paste. Put the paste on the fixtures and all of the tub’s edges. Scrub the paste with an old toothbrush in a circular motion. Use warm water to rinse the paste off.
Step 4: Fill and Empty
After the entire amount of soap and baking soda residue has been removed, give the tub one last soak in warm water. Warm water should be added to the tub a few inches above the jets. Leave the valves open and run the jets for fifteen minutes. Once there is no more debris, empty the tub.
Step 5: Dry Wipe
To avoid water stains, use a microfiber towel to dry the tub after it has drained entirely.
How to Maintain a Jetted Tub
Every time you take a bath, try to give your jets a brief tune-up to ensure that they stay clear between deep cleans. filling the tub with hot water and letting the water sit for 10 minutes after each use. This will break up leftover soap residue. After that, empty the tub and use a microfiber cloth soaked in a mixture of vinegar and alcohol to clean the tub. This will assist in significantly lowering the quantity of residue that travels through your jets. Above all, stay up to date.
Image From Freepik